Chapter 4: Unit Management
Configuring Unit Parameters
To view and configure system information:
1. Select Platform > Management > Unit Parameters. The Unit Parameters page opens.
2.
Table 25
describes the fields in the Unit Parameters page.
Figure 54 Unit Parameters Page
Table 19 Unit Parameters
Parameter
Name
Description
System up time
Contact person
Location
Definition
A name for the unit (optional, up to 128 characters). This name appears at the
top of every Web EMS page.
Descriptive information about the unit. This information is used for debugging,
and should include information such as the unit type.
The time since the system was last reinitialized.
The name of the person to be contacted if and when a problem with the
system occurs (optional).
The actual physical location of the node or agent (optional).
phn-3963_008v000
Page 4-33
Configuring Unit Parameters