Configuring Trap Managers - Cambium Networks PTP 820C User Manual

Hide thumbs Also See for PTP 820C:

Table of Contents

Chapter 4: Unit Management

Configuring Trap Managers

You can configure trap forwarding parameters by editing the Trap Managers table. Each line in the

Trap Managers table displays the setup for a manager defined in the system.

To configure trap managers:

1. Select Platform > Management SNMP > Trap Managers. The Trap Managers page opens.

Figure 73 Trap Managers Page

2. Select a trap manager and click Edit. The Trap Managers Edit page opens.

phn-3963_004v000

Table of Contents