Configuring Trap Managers; Figure 38 Trap Managers Page - Cambium Networks PTP 850E User Manual

Chapter 4: Unit Management

Configuring Trap Managers

Configuring Trap Managers
You can configure trap forwarding parameters by editing the Trap Managers table. Each line in the Trap Managers
table displays the setup for a manager defined in the system.
To configure trap managers:
1. Select Platform > Management SNMP > Trap Managers. The Trap Managers page opens.

Figure 38 Trap Managers Page

2. Select a trap manager and click Edit. The Trap Managers Edit page opens.
phn-3963_008v000
Page 4-8