asieps_tobira_IM_US.book 8 ページ 2012年1月17日 火曜日 午後3時48分
INTAKE (INDUCTION)
5. INTERCOOLER WATER SPRAY
(9)
(7)
(1)
Water tank ASSY
(2)
Water tank cap
(3)
Clamp
(4)
Rear hose
B: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting connectors of sensors or
units, be sure to disconnect the ground cable from
the battery.
General Description
(8)
(6)
(5)
Clamp
(6)
Center hose
(7)
Front hose
(8)
Intercooler hose
IN(H4DOTC)-8
(2)
(1)
(5)
T
(5)
(9)
Nozzle
Tightening torque:N·m (kgf-m, ft-lb)
T: 6 (0.6, 4.4)
(3)
T
(4)
IN-00193