Show Vlt Mismatch - Dell Z9500 Command Reference Manual

Version
9.7(0.0)
9.5(0.1)
9.2(0.2)
9.2(0.0)
9.0.2.0
Example
Dell#show vlt inconsistency ip mroute
Spanned Multicast Routing IIF Inconsistency
Multicast Route
---------------
(22.22.22.200, 225.1.1.2)
(*, 225.1.1.2)
Dell#

show vlt mismatch

Display mismatches in VLT parameters.
Syntax
show vlt mismatch
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.7(0.0)
9.5(0.1)
9.2(0.2)
9.2(0.0)
9.0.2.0
1864
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the S6000.
LocalIIF
----------
VLAN 5
VLAN 15
Description
Introduced on the S6000-ON.
Introduced the support for Q-in-Q implementation over
VLT on the S-Series and Z-Series.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the S6000.
PeerIIF
---------
VLAN 6
te 1/5
Virtual Link Trunking (VLT)