Description - Dell Z9500 Command Reference Manual

interface
ipv6
packets
state
timer
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.5.1.0
6.2.1.1
Usage If no options are specified, debug is active on all interfaces and all VRRP groups.
Information

description

Configure a short text string describing the VRRP group.
Z9500
Syntax
description text
To delete a VRRP group description, use the no description command.
Parameters
text
Defaults Not enabled.
1886
Enter the keyword interface to enable debugging of
interface state changes..
Enter the keyword ipv6 to enable debugging for IPv6.
Enter the keyword packets to enable debugging of VRRP
control packets.
Enter the keyword state to enable debugging of VRRP state
changes.
Enter the keyword timer to enable debugging of the VRRP
timer.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a text string up to 80 characters long.
Virtual Router Redundancy Protocol (VRRP)