vlan-range
Command
VLT DOMAIN PROXY GW LLDP
Modes
Command
Version
History
9.5(0.1)
9.4(0.0)
Usage
You can configure the port channel interface that must be associated with the
Information
LLDP proxy gateway and exclude a VLAN or a range of VLANs from proxy routing.
This parameter is for an LLDP proxy gateway configuration.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-
channel 20 exclude-vlan 3
proxy-gateway peer-timeout
Configure the proxy-gateway VLT peer timeout value.
Z9500
Syntax
[no] peer-timeout value
Parameters
value
Command
VLT DOMAIN PROXY GW LLDP
Modes
Command
Version
History
9.5(0.1)
1878
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Enter the timeout value in seconds. The range is from 1 to
65535. The default is infinity.
Description
Introduced on the Z9500.
VLT Proxy Gateway