Peer-Domain-Link Port-Channel Exclude-Vlan - Dell Z9500 Command Reference Manual

mac-address
vlan-range
Command VLT DOMAIN PROXY GW STATIC
Modes
Command
Version
History
9.5(0.1)
9.4(0.0)
Usage You can configure the remote MAC address of the VLT peer to be associated with
Information the static VLT proxy gateway and exclude a VLAN or a range of VLANs from proxy
routing. This parameter is for a static VLT proxy gateway configuration.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3

peer-domain-link port-channel exclude-vlan

Configure proxy-gateway LLDP, specify a port-channel and a VLAN or range of VLANs, and exclude a
VLAN or a range of VLANs from proxy routing.
Z9500
Syntax
[no] peer-domain-link port-channel interface-identifier
exclude-vlan vlan-range
Parameters
port-channel
VLT Proxy Gateway
Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn
format.
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Configure the proxy-gateway interface port-channel. Port
channel range is from 1 to 128.
1877