Show Vlt-Proxy-Gateway - Dell Z9500 Command Reference Manual

show vlt-proxy-gateway

Display the VLT proxy gateway configuration.
Z9500
Syntax
show vlt-proxy-gateway info {lldp | static}
Parameters
lldp
static
Command EXEC
Modes
EXEC Privilege
EXEC Privilege
Command
Version
History
9.5(0.1)
9.4(0.0)
Usage
At any point of time the proxy-gateway feature may go operationally down for the
Information
following reasons,
1) LLDP globally disabled
2) LLDP disabled per port
3) VLT port-channel is down
5) LLDP neighbor down
So, the proxy-gateway feature could be operationally down though properly
configured and this will be reported in the "show command".
When more than one VLT port-channel terminates on the same TOR, output of the
show VLT proxy-gateway info lldp command may show the port-channel
id incorrectly.
Example
Dell(conf)#do sh vlt proxy-gateway info static
Mac Address
-----------
00:01:e8:8b:1c:c0
Dell#show vlt proxy-gateway info lldp
LagId
1880
Display details about the LLDP VLT proxy gateway
configuration
Display details about the static VLT proxy gateway
configuration
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Exclude Vlan
------------
Mac Address Exclude Vlan
VLT Proxy Gateway