Preempt - Dell Z9500 Command Reference Manual

Usage If a switch is a MASTER and you change the hold timer, disable and re-enable VRRP
Information for the new hold timer value to take effect.
Related disable
Commands

preempt

To preempt or become the MASTER router, permit a BACKUP router with a higher priority value.
Z9500
Syntax
preempt
To prohibit preemption, use the no preempt command.
Defaults Enabled (that is, a BACKUP router can preempt the MASTER router).
Command VRRP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
priority
Specify a VRRP priority value for the VRRP group. The VRRP protocol uses this value during the MASTER
election process.
Z9500
Syntax
priority priority
To return to the default value, use the no priority command.
Virtual Router Redundancy Protocol (VRRP)
— disables a VRRP group.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1889