Show Vlt Counters - Dell Z9500 Command Reference Manual

Version
9.5(0.1)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.8.0
Example
Dell_VLTpeer1# show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
HeartBeat Timeout:
UDP Port:
HeartBeat Messages Sent:
HeartBeat Messages Received: 1025

show vlt counters

Displays the counter information.
Syntax
show vlt counters [arp| igmp-snoop | interface | mac | ndp]
Parameters
arp
igmp-snoop
interface
mac
ndp
Default Not configured.
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Virtual Link Trunking (VLT)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
10.11.200.18
Up
1
3
34998
1026
Enter the keyword arp to display the ARP counter
information for the VLT.
Enter the keywords igmp-snoop to display the igmp-
snooping counter information for the VLT.
Enter the keyword interface to display the interface
counter information for the VLT.
Enter the keyword mac to display the MAC address counter
information for the VLT.
Enter the keyword ndp to display the VLT counter
information for NDP.
1861