Debug Vrrp - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1

debug vrrp

Allows you to enable debugging of VRRP.
Z9500
Syntax
debug vrrp interface [vrrp-id] {all | bfd | database |
interface | ipv6 | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all |
bfd | database | interface | ipv6 | packets | state | timer}
command.
Parameters
interface
vrrp-id
all
bfd
database
Virtual Router Redundancy Protocol (VRRP)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the following keywords and slot/port or number
information
• For Port Channel interface types, enter the keywords
port-channel then the number. The range is from 1 to
128.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN interface, enter the keyword vlan then the
VLAN ID. The VLAN ID range is from 1 to 4094.
(OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
Enter the keyword all to enable debugging of all VRRP
groups.
Enter the keyword bfd to enable debugging of VRRP BFD
interactions.
Enter the keyword database to enable debugging of
configuration changes.
1885