Show Ip Pim Neighbor - Dell S4810 Reference Manual

172.21.110.1
172.21.203.1

show ip pim neighbor

View PIM neighbors.
S4810
Syntax
show ip pim neighbor
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim neighbor command shown in the
Information
following example.
Field
Neighbor address
Interface
Uptime/expires
Ver
DR prio/Mode
1286
Gi 13/6
Gi 13/7
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Displays the IP address of the PIM neighbor.
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was
found.
Displays the amount of time the neighbor has been up then
the amount of time until the neighbor is removed from the
multicast routing table (that is, until the neighbor hold time
expires).
Displays the PIM version number.
• v2 = PIM version 2
Displays the Designated Router priority and the mode.
v2/S 0 30 1 172.21.110.1
v2/S 0 30 1 172.21.203.1
PIM-Sparse Mode (PIM-SM)