Avaya G450 Cli Reference Manual page 47

Table 4: ASG authentication CLI commands (continued)
Command
copy scp auth-file
copy tftp auth-file
copy usb auth-file
erase auth-file
login authentication
lockout
login authentication
local-craft-password
login authentication
response-time
login authentication
services-login
ppp authentication
show auth-file info
show download auth-file
status
show login authentication
show upload auth-file
status
username
Description
Download an ASG authentication file from a remote
SCP server
Download an ASG authentication file from a remote
TFTP server
Download an ASG authentication file from a USB mass
storage device
Erase the gateway's ASG authentication file
Set a policy for locking out access to the gateway after
successive failed login attempts
Enable password authentication of Avaya Services
local connections to the Console port and Services port
with the "craft" login. Use the no form to disable
password authentication for Avaya Services local
connections to the Console port and Services port.
When password authentication is disabled, ASG
authentication is activated.
Set the time the gateway waits for user response to
authentication requests before timing out a connection
Activate all Avaya Services logins, including local login
to Console port and Services port with "craft" login. Use
the no form to deactivate all Avaya Services logins.
Set modem operation mode. Setting the mode to ras
enables ASG authentication for Avaya Services remote
login through a dial-up modem connection.
Display ASG authentication file information
Display download status of ASG authentication file,
after using copy ftp|scp|tftp auth-file to
download an authentication file to the gateway
Display login authentication settings and information
Display upload status of ASG authentication file, after
using copy auth-file ftp|scp|tftp to upload an
authentication file from the gateway
Add a local user account or remove a user account
from the system
2 of 2
Issue 1 January 2008 47