Roadmap
Table 12: CNA test plugs CLI commands (continued)
Root level command
cna-testplug-service
show cna testplug
Configuration files
Table 13: Configuration files CLI commands
Command
copy ftp startup-config
copy running-config ftp
copy running-config scp
copy running-config
startup-config
copy running-config tftp
52 Avaya G450 CLI Reference
First level command
rtp-echo-port
rtp-test-port
scheduler
shutdown (CNA test
plugs)
test-rate-limit
Description
Download a G450 configuration file from an FTP server
to the Startup Configuration NVRAM
Upload the current G450 configuration to a file on an
FTP server
Upload the current G450 configuration to a file on a
SCP server
Commit the current configuration, including Standard
Local Survivability (SLS) data, to NVRAM
Upload the current G450 configuration to a file on a
TFTP server
Description
Set or reset the UDP port used by the CNA
test plug to listen for RTP streams sent by
other test plugs running RTP tests
Set or reset the UDP port used by the CNA
test plug to send an RTP stream to another
test plug in an RTP test
Add a scheduler's IP address to the list of
schedulers with which the test plug can
attempt to register
Disable the CNA test plug
Configure the CNA test rate limiter
Enable or disable the CNA test plug service
on the gateway
Display CNA test plug configuration and
statistics
2 of 2
1 of 2