Ip Ospf Auth-Change-Wait-Time - Dell S4810 Reference Manual

To disable graceful restart role, use the no graceful-restart role command.
Parameters
role helper-
only
role restart-
only
Defaults By default, OSPF routers are both helper and restart routers during a graceful
restart.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version
8.3.12.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.5.1.0
pre-Version
6.1.1.1

ip ospf auth-change-wait-time

OSPF provides a grace period while OSPF changes its interface authentication type. During the grace
period, OSPF sends out packets with new and old authentication scheme until the grace period expires.
S4810
Syntax
ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time
command.
Parameters
seconds
1178
(OPTIONAL) Enter the keywords helper-only to specify
the OSPF router is a helper only during graceful restart.
(OPTIONAL) Enter the keywords restart-only to specify
the OSPF router is a restart only during graceful-restart.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF. Added Restart and
Helper roles support on the S-Series.
Added Helper-Role support on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the seconds. The range is from 0 to 300.
Open Shortest Path First (OSPFv2 and OSPFv3)