Field
Outgoing
interface list:
Example
show ip rpf
View reverse path forwarding.
C9000 Series
Syntax
show ip rpf
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.1
E-Series legacy
command
Usage Information Network administrators use static mroutes to control the reach-ability of the multicast
sources. If a PIM-registered multicast source is reachable using static mroute as well as
unicast route, the distance of each route is examined and the route with shorter
distance is the one the PIM selects for reach-ability.
Description
Lists the interfaces that meet one of the following:
•
•
•
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
NOTE:
The default distance of mroutes is zero (0) and is CLI configurable on a
per route basis.
a directly connected member of the Group
statically configured member of the Group
received a (*,G) or (S,G) Join message
Multicast
1400