Table of Contents
Advertisement
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface
Trusted
---------
--------
Gi1/0/1
Yes
Gi1/0/2
No
Gi1/0/3
No
Gi1/0/4
No
Gi1/0/6
No
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface interface-id |
port-channel port-channel-number] [vlan vlan-id]
static | dynamic — Use these keywords to filter by static or dynamic
•
bindings.
•
interface-id — The physical interface for which to show bindings.
•
port-channel-number—The port channel for which to show bindings.
•
vlan-id — The VLAN identifier for which to show bindings.
Log Invalid Pkts
----------------
No
Yes
Yes
No
No
Layer 2 Switching Commands
347
Advertisement
Table of Contents
