Show Ip Rpf - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

show ip rpf

View reverse path forwarding.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.1

E-Series legacy

Network administrators use static mroutes to control the reach-ability of the

multicast sources. If a PIM-registered multicast source is reachable using static

mroute as well as unicast route, the distance of each route is examined and the

route with shorter distance is the one the PIM selects for reach-ability.

Dell#show ip rpf

RPF information for 10.10.10.9

EXEC Privilege

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

NOTE: The default distance of mroutes is zero (0) and is CLI configurable on a

per route basis.

RPF interface: Gi 3/4

RPF neighbor: 165.87.31.4

RPF route/mask: 10.10.10.9/255.255.255.255

RPF type: unicast