Usage
This command is available at the global level only.
Information
iscsi priority-bits
Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
Syntax
iscsi priority-bits priority-bitmap
To remove the configured iSCSI priority, use the no iscsi priority-bits
command.
Parameters
priority-bitmap
Defaults
0x10
Command
PROTOCOL LLDP
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage
This command is available at the global level only.
Information
priority
Configure the priority for the PFC threshold to be allocated to the buffer space parameters.
Syntax
priority value buffer-size size pause-threshold threshold-value
resume-offset threshold-value shared-threshold-weight size
Parameters
priority
value
buffer-size
size
pause-
threshold
430
Enter the priority-bitmap range. The range is from 1 to FF.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
Specify the priority of the queue for which the buffer space
settings apply
Enter a number in the range of 0 to 7 to denote the priority
to be allocated to the dynamic buffer control mechanism
Ingress buffer size
Size of the ingress buffer in KB. Enter a number in the range
of 0 to 7787. The default is 45 KB.
Buffer limit for pause frames to be sent
Data Center Bridging (DCB)