Show Ip Rpf - Dell S4810 Reference Manual

show ip rpf

View reverse path forwarding.
S4810
Syntax
show ip rpf
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.1
E-Series legacy
command
Usage Network administrators use static mroutes to control the reach-ability of the
Information multicast sources. If a PIM-registered multicast source is reachable using static
mroute as well as unicast route, the distance of each route is examined and the
route with shorter distance is the one the PIM selects for reach-ability.
Example
Dell#show ip rpf
RPF information for 10.10.10.9
1150
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
NOTE: The default distance of mroutes is zero (0) and is CLI configurable on a
per route basis.
RPF interface: Gi 3/4
RPF neighbor: 165.87.31.4
RPF route/mask: 10.10.10.9/255.255.255.255
RPF type: unicast
Multicast