status conference
Multipoint Command Visualize.
MCV
y = For input, an endpoint requests to become a broadcaster. This is used
during Still Frame Graphics and to force "presentation" mode.
y = The VC board detects voice energy from the endpoint. The TALK counter
TALK
indicates the number of starts or stops.
y = The endpoint is receiving video (MCU is sending video to the endpoint).
VRCV
The VRCV counter counts the number of times video sends or does not send to
this endpoint.
Single screen and quad-screen presentation mode conferences.
BCTK
y = The endpoint is the video broadcast source. The BCTK counter tallies the
number of times this endpoint is the video broadcast source.
Single screen conferences.
RTTK
y = The endpoint is the return video source. The RTTK counter tallies the
number of times this endpoint is the return video source.
Single and quad-screen presentation mode conferences.
BCLS
y = The endpoint is watching the video of the broadcast source.
Single screen conferences.
RTLS
y = The endpoint is watching the video of the return source.
y = Endpoint hyperactivity (MCU isolates endpoints from the MMCH
HYPR
conference due to "thrashing" behavior) affects the endpoint's status as a video
source (for 5 seconds of hyperactivity timer). The HYPR counter tallies the
number of times this endpoint is hyperactive.
y = The VC board or the software in the MCU mute the decoder. VC boards
DMUTE
mutes the decoder when it loses MMI or endpoint framing, when it receives
invalid audio code words, and when endpoints are hyperactive. MCU software
mutes the endpoint decoder of all endpoints besides the broadcaster. (when a
mode of a conference is "broadcastw/scan",broadcast with auto scan) The
DMUTE counter tallies the number of times the VC board mutes this endpoint's
decoder.
Quad-screen conferences. This field always defaults to n, indicating QCIF
VFMT
format.
y = Video framing loss. The H.261 counter tallies the number of times framing
H.261
is lost.
555-233-119
Issue 5 October 2002
465
Need help?
Do you have a question about the DEFINITY Server CSI and is the answer not in the manual?
Questions and answers