Status Isdn-Testcall - Avaya DEFINITY Server CSI Maintenance Manual

status isdn-testcall

status isdn-testcall
This command displays the progress of an outgoing ISDN-PRI test call. The
status screen shows the tested ISDN-PRI B-channel port number, bit error rate,
number of bits transmitted, block error rate, number of blocks transmitted, start
time, duration specified, duration of test call and reason of termination.
Action/Object Qualifier
status group
isdn-testcall number
group
member
number
print
Feature Interactions
If the bit error rate or block error rate is greater than zero, the ISDN-PRI trunk may
be in trouble. The statistical information displayed on the terminal may deactivate
the ISDN trunk. This is subjective because the ISDN trunk may be used for data
or voice. If the trunk is used for data and the rates are high, the trunk should be
deactivated. If the trunk is used for voice, the trunk may not be deactivated. Also,
high rates be at risk for some type of power hit.
Output
The following example shows the output from status idsn-testcall 80/1.
status isdn-testcall 80/1
Bit Number Block Number
Error Of
Port Rate Bits
1B1401 0EE0 4EE7
555-233-119
Qualifier Description
Administered trunk group number
Administered group number (trunk
within a trunk group)
Report sent to printer
ISDN TESTCALL STATUS
Error Of Start
Rate Blocks Time
0EE0 6EE2 25/12:36 120
Logins Default
init none
inads
craft
Page 1 of 1 SPE A
Duration Reason
Duration Of Of
Specified Test Termination
100 in progress
Issue 5 October 2002
Feature Interactions
see below
487