Status Hardware-Group - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands

status hardware-group

Use status hardware-group to display summary information for the active or last
hardware group test. The information includes the number and percentage of
tested maintenance objects, the percentage of tests passed, failed, and aborted,
the time elapsed since initiating the hardware group test, the specific hardware
group test command (see
(active/canceled/complete) of the hardware-group test.
Action/Object Qualifier
status print
hardware-group
Output
The following example shows the output from status hardware-group.
status hardware-group
Hardware Group Command State:
Total Number of MOs to be Tested:
Elapsed Test Time (hr:min:sec): 0:15:30
Percentage of Tests Passed:
Percentage of Tests Failed:
Percentage of Tests Aborted:
ENTERED HARDWARE GROUP COMMAND
Command: test hardware-group system
Test sequence: short
Test repetition: repeat 3
Output Options: failures
Hardware Options: SPE-interchange
478
Issue 5 October 2002
''test hardware-group'') initiated, and the state
Qualifier Description
Report sent to printer
HARDWARE GROUP STATUS
Number of MOs Tested:
Percent Complete:
Repetition Number:
Logins Defaults
init none
inads
craft
cust
rcust
bcms
browse
page 1 of 1
active
11070
12300
90%
1
82%
11%
7%
Feature Interactions
none
555-233-119