Turning Lights On and Off
Individual lighting fixtures or entire light groups can be turned on or off to achieve the desired lighting
effects in a rendered image. When you turn on or off lights in a 3D view, the settings are saved as part of
the view properties, and they affect that view only. They do not affect rendered images for any other 3D
views.
If a lighting fixture is a nested family that is not shared, you cannot control individual light sources in the
fixture. Instead, you turn the entire lighting fixture on or off. See
1107.
To turn lights on or off
1 Open the Artificial Lights dialog.
2 In the Artificial Lights dialog, under On/Off, select individual lighting fixtures or light groups
3 Click OK.
4 To see the results, render the image.
Renaming a Light Group
1 Open the Artificial Lights dialog.
2 In the Artificial Lights dialog, select the group name.
3 Under Group Options, click Rename.
4 In the Rename dialog, enter a new group name.
5 Click OK.
Deleting a Light Group
1 Open the Artificial Lights dialog.
2 In the Artificial Lights dialog, select the group name.
3 Under Group Options, click Delete.
Revit Architecture deletes the light group. All of the lighting fixtures that belonged to that group are listed
under Ungrouped Lights.
Plants and Entourage
You can include plants, cars, people, and other entourage in project views. When you render a view, the
entourage is also rendered, adding realistic details to the image.
See
Opening the Artificial Lights Dialog
to include them in the rendered image. Clear the check boxes to omit the lights in the rendered
image.
You can also enter values in the Dimming column to dim individual lighting fixtures or entire
light groups. See
Dimming Lights
See
Rendering an Image
See
Opening the Artificial Lights Dialog
See
Opening the Artificial Lights Dialog
on page 1136.
on page 1134.
on page 1158.
on page 1136.
on page 1136.
Sharing a Lighting Fixture Family
Plants and Entourage | 1139
on page
Need help?
Do you have a question about the 24000-000000-9860 - Revit Architecture - PC and is the answer not in the manual?