Contains String [C] Search Mode; Starts With [S] Search Mode; Figure 4: Ui Search Modes; Figure 5: "Contains String" Search Mode Example - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
34
value; as you enter more characters, the UI continues to search for a match. Use the
arrow keys to move between matching values. If your entry appears in red, no matching
value was found within the selected screen or dialog box.
To locate a different data type, such as an IP address, change the search mode. To display
all available search modes, press the backslash key (\). The search mode window appears,
as shown in Figure 4 on page 34.

Figure 4: UI Search Modes

Press the key that represents the search mode you want to use, and then begin typing
the search criteria. You can search within a category or across different categories in the
Object Manager. Press the ESC key to end the search operation and close the window.
The following sections provide examples of each search mode.

Contains String [C] Search Mode

Use to locate a pattern anywhere in a string. For example, to locate the pattern "RPC" in
service objects:
In the main navigation tree, select Object Manager > Service Objects > Predefined
1.
Service Objects, and then select the Service Object icon at the top of the Service
Tree tab.
Press the backslash key (\) to display the search mode window.
2.
Enter C, and then enter RPC. The UI automatically highlights the first match,
3.
MS-RPC-ANY, as shown in Figure 5 on page 34.

Figure 5: "Contains String" Search Mode Example

Starts With [S] Search Mode

Use to locate a pattern at the beginning of a string. For example, to locate the pattern
"OR" in devices:
Copyright © 2010, Juniper Networks, Inc.