Usb Storage Device; File System Management - Alcatel-Lucent 7210 SAS-D Configuration Manual

Volume in drive cf1 on slot A is formatted as FAT32.
Directory of cf1:\
10/12/2011
10/17/2011
10/26/2011
10/27/2011
10/27/2011
10/17/2011
10/26/2011
10/11/2011
10/26/2011
10/19/2011
10/17/2011
10/17/2011
10/17/2011
10/17/2011
10/17/2011
10/18/2011
*A:7210-SAS #
In the above example, the total of files and directories is 14 files + 2 directories = 16.

USB Storage Device

Note: USB devices are not supported on 7210 SAS-D devices.
7210 SAS platform support USB interface which provides storage functionality. It allows the use
of USB sticks providing them an alternate storage location with larger capacity than the internal
flash.
The USB storage device can be used to store Timos images, configuration files, accounting
records, and log files. The BOF file can point to images on USB and be used to load Timos images
and configuration files.
7210 SAS-K provide an option to load the bootloader (boot.tim) from the USB storage device
plugged into any one of the USB ports. This option is not available on 7210 SAS-E.
NOTE:
•
•
7210 SAS D, E, K OS Basic System Configuration Guide
10:37p
07:28a
10:06p
09:04p <DIR>
09:06p <DIR>
07:30a
10:43p
06:42a
10:42p
04:22a
07:37a
07:38a
07:38a
07:39a
07:38a
10:46p
14 File(s)
2 Dir(s)
The list of USB devices and the capacities that is supported for use with 7210 SAS are
listed in the 7210 SAS OS Software Release Notes.
When an USB device is unplugged or removed from the system a major alarm is raised.
The alarm can be cleared using the shutdown command.
4248394 boot.tim
524 sasm.sdx
828 bof.cfg
act-collect
act
0 test1.txt
5360 sasm.cfg
28821599 both.tim
14597 bootlog.txt
832 bof.cfg.1
827 test1
827 tes2
827 tes3
827 tes3567
827 tes356
5481 sasm.cfg.1
33117369 bytes.
80470016 bytes free.

File System Management

Page 85