Portal Configuration Commands - 3Com S7906E Command Reference Manual

1

Portal Configuration Commands

EA series cards, LSQ1GP12EA and LSQ1TGX1EA for example, do not support Portal authentication.
Portal Configuration Commands
display portal acl
Syntax
display portal acl { all | dynamic | static } interface interface-type interface-number
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all portal access control lists (ACLs), including dynamic ones and static ones.
dynamic: Displays dynamic portal ACLs, namely, ACLs generated after a user passes portal
authentication.
static: Displays static portal ACLs, namely, ACLs generated by related configurations.
interface interface-type interface-number: Displays the ACLs on the specified interface.
Description
Use the display portal acl command to display the ACLs on a specified interface.
Examples
# Display all ACLs on interface Vlan-interface 2.
<Sysname> display portal acl all interface Vlan-interface 2
Vlan-interface2 portal ACL rule:
Rule 0
Inbound interface = Vlan-interface2
Type
Action
Source:
= static
= permit
1-1