Reset Dot1X Statistics - 3Com S7906E Command Reference Manual

Supplicant timeout timer (supp-timeout): Once an authenticator sends an EAP-Request/MD5
Challenge frame to a supplicant, it starts this timer. If this timer expires but it receives no response
from the supplicant, it retransmits the request.
Username
EAP-Request/Identity frame to a supplicant, it starts this timer. If this timer expires but it receives
no response from the supplicant, it retransmits the request. In addition, to be compatible with
clients that do not send EAPOL-Start requests unsolicitedly, the device multicasts
EAP-Request/Identity frame periodically to detect the clients, with the multicast interval defined by
tx-period.
It is unnecessary to change the timers unless in some special or extreme network environments. The
change of a timer takes effect immediately.
Related commands: display dot1x.
Examples
# Set the server timeout timer to 150 seconds.
<Sysname> system-view
[Sysname] dot1x timer server-timeout 150

reset dot1x statistics

Syntax
reset dot1x statistics [ interface interface-list ]
View
User view
Default Level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument. The start port number must be smaller than the end number
and the two ports must be of the same type.
Description
Use the reset dot1x statistics command to clear 802.1X statistics.
With the interface interface-list argument specified, the command clears 802.1X statistics on the
specified ports. With the argument unspecified, the command clears global 802.1X statistics and
802.1X statistics on all ports.
Related commands: display dot1x.
Examples
# Clear 802.1X statistics on port GigabitEthernet 2/0/1.
request timeout timer (tx-period): Once
1-17
an authenticator sends an