3Com S7906E Command Reference Manual page 1831

View
System view, Ethernet interface view
Default Level
2: System level
Parameters
logoff: Gets offline any user trying to log in through a proxy.
trap: Sends a trap to the network management system when detecting that a user is trying to log in
through a proxy.
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument. The start port number must be smaller than the end number
and the two ports must be of the same type.
Description
Use the dot1x supp-proxy-check command to enable detection and control of users logging in
through proxies for specified or all ports.
Use the undo dot1x supp-proxy-check command to disable the function for specified or all ports.
By default, the function is disabled.
Note that:
This function requires the cooperation of the iNode client program.
In system view, this command enables detection and control of users' login for all ports with
interface-list not provided, and enables detection and control of users' login for specified ports with
interface-list provided.
In Ethernet interface view, you cannot specify the interface-list argument and can only enable
detection and control of users' login for the current port.
This function must be enabled both globally in system view and for the intended ports in system
view or Ethernet interface view. Otherwise, it does not work.
Related commands: display dot1x.
Examples
# Specify ports GigabitEthernet 2/0/1 to 1/8 to get users offline when they are trying to log in through
proxies.
<Sysname> system-view
[Sysname] dot1x supp-proxy-check logoff
[Sysname] dot1x supp-proxy-check logoff interface GigabitEthernet 2/0/1 to GigabitEthernet
2/0/8
# Specify port GigabitEthernet 2/0/9 to send a trap packet when detecting that a user is trying to log in
through a proxy.
<Sysname> system-view
[Sysname] dot1x supp-proxy-check trap
[Sysname] dot1x supp-proxy-check trap interface GigabitEthernet 2/0/9
1-15