ST STM32G4 Series Reference Manual page 936

High-resolution timer (HRTIM)
Bit 31 Reserved, must be kept at reset value.
Bit 30 DLYPRTDE: Delayed protection DMA request enable
This bit is set and cleared by software to enable/disable DMA requests on delayed protection.
0: Delayed protection DMA request disabled
1: Delayed protection DMA request enabled
Bit 29 RSTDE: Reset/roll-over DMA request enable
This bit is set and cleared by software to enable/disable DMA requests on timer x counter reset or
roll-over in continuous mode.
0: Timer x counter reset/roll-over DMA request disabled
1: Timer x counter reset/roll-over DMA request enabled
Bit 28 RSTx2DE: Output 2 reset DMA request enable
Refer to RSTx1DE description
Bit 27 SETx2DE: Output 2 set DMA request enable
Refer to SETx1DE description
Bit 26 RSTx1DE: Output 1 reset DMA request enable
This bit is set and cleared by software to enable/disable Tx1 output reset DMA requests.
0: Tx1 output reset DMA request disabled
1: Tx1 output reset DMA request enabled
Bit 25 SETx1DE: Output 1 set DMA request enable
This bit is set and cleared by software to enable/disable Tx1 output set DMA requests.
0: Tx1 output set DMA request disabled
1: Tx1 output set DMA request enabled
Bit 24 CPT2DE: Capture 2 DMA request enable
Refer to CPT1DE description
Bit 23 CPT1DE: Capture 1 DMA request enable
This bit is set and cleared by software to enable/disable capture 1 DMA requests.
0: Capture 1 DMA request disabled
1: Capture 1 DMA request enabled
Bit 22 UPDDE: Update DMA request enable
This bit is set and cleared by software to enable/disable DMA requests on update event.
0: Update DMA request disabled
1: Update DMA request enabled
Bit 21 Reserved, must be kept at reset value.
Bit 20 REPDE: Repetition DMA request enable
This bit is set and cleared by software to enable/disable DMA requests on repetition event.
0: Repetition DMA request disabled
1: Repetition DMA request enabled
Bit 19 CMP4DE: Compare 4 DMA request enable
Refer to CMP1DE description
Bit 18 CMP3DE: Compare 3 DMA request enable
Refer to CMP1DE description
Bit 17 CMP2DE: Compare 2 DMA request enable
Refer to CMP1DE description
936/2083 RM0440 Rev 1
RM0440