Figure 226. Burst Mode And Delayed Protection Priorities (Didl = 0) - ST STM32G4 Series Reference Manual

High-resolution timer (HRTIM)

Figure 226. Burst mode and delayed protection priorities (DIDL = 0)

Output
State
Output
State
The same priorities are applied when the delayed burst mode entry is enabled (DIDL bit
set), as shown on
858/2083
Delayed protection
Entry (discarded, burst
has priority)
Burst entry
RUN
Burst entry
Delayed
protection
Entry
RUN
Figure 227 below.
Delayed protection
exit (discarded, burst
has priority)
IDLE
Burst exit (discarded,
delayed protection has
IDLE
RM0440 Rev 1
Burst exit
priority)
Delayed
protection
exit
RM0440
RUN
RUN
MS32280V1