Siemens G130 List Manual page 1090

2 Parameters
2.4 Parameters for write protection and know-how protection
p2007
p2030
p2038
p2079
p4956[0...n]
p7763
p7764[0...n]
p7852
p8836
p8870[0...15]
p8870[0...31]
p8871[0...15]
p8871[0...31]
p8872[0...15]
p8872[0...31]
p9500
p9601
p9810
p9902
1090
Reference acceleration / a_ref
Field bus int protocol selection / Field bus protocol
IF1 PROFIdrive STW/ZSW interface mode / PD STW/ZSW IF mode
IF1 PROFIdrive PZD telegram selection extended / IF1 PZD telegr ext
TEC DO-specific activation / TEC DO act
KHP OEM exception list number of indices for p7764 / KHP OEM qty p7764
KHP OEM exception list / KHP OEM excep list
Number of indices for r7853 / Qty indices r7853
SINAMICS link node address / Node address
SINAMICS Link PZD receive word / PZD recv word
SINAMICS Link PZD receive word / PZD recv word
SINAMICS Link PZD send word / PZD send word
SINAMICS Link PZD send word / PZD send word
SINAMICS Link PZD receive address / PZD recv adr.
SINAMICS Link PZD receive address / PZD recv adr.
SI Motion monitoring clock cycle (Control Unit) / SI Mtn clock CU
SI enable functions integrated in the drive (Control Unit) / SI enable fct CU
SI PROFIsafe address (Motor Module) / SI PROFIsafe MM
Target topology number of indices / TargetTopo indices
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A