Debug Dynamic-Dns Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug dynamic-dns [verbose]
Use the debug dynamic-dns command to display debug messages associated with dynamic domain
naming system (DNS). Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages.
Syntax Description
verbose
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1
Usage Examples
The following example activates dynamic DNS debug messages:
>enable
#debug dynamic-dns verbose
61200990L1-35E
Enables detailed debug messages.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
99