Debug Chat-Interfaces Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug chat-interfaces <chat interface>
Use the debug chat-interfaces command to activate debug messages associated with chat AT command
driven interfaces. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Syntax Description
<chat interface>
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example activates debug messages for the chat interface 0/1:
>enable
#debug chat-interfaces 0/1
61200990L1-35E
Specifies the chat interface to debug in slot/port format.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
93