Debug Dial-Backup Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug dial-backup
Use the debug dial-backup command to activate debug messages associated with dial-backup operation.
Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 2.1
Functional Notes
The debug dial-backup command activates debug messages to aid in the troubleshooting of dial-backup
links.
Usage Examples
The following example activates debug messages for dial-backup operation:
>enable
#debug dial-backup
61200990L1-35E
Command was introduced.
Additional debug messages were implemented for dial-backup operation to
ADTRAN's IQ and Express Series products.
Copyright © 2005 ADTRAN
Enable Mode Command Set
97