Clear Bridge Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear bridge <group#>
Use the clear bridge command to clear all counters associated with bridging (or for a specified
bridge-group).
Syntax Description
<group#>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 1.1
Usage Examples
The following example clears all counters for bridge group 17:
>enable
#clear bridge 17
61200990L1-35E
Optional. Specifies a single bridge group (1 to 255).
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
41