Clear Crypto Ike Sa Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear crypto ike sa <policy priority>
Use the clear crypto ike sa command to clear existing IKE security associations (SAs), including active
ones.
Syntax Description
<policy priority>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1
Usage Examples
The following example clears the entire database of IKE SAs (including the active associations):
>enable
#clear crypto ike sa
61200990L1-35E
Optional. Clears out all existing IKE SAs associated with the designated policy
priority. This number is assigned using the crypto ike policy command. Refer to
crypto ike on page 322
Command was introduced.
Copyright © 2005 ADTRAN
for more information.
Enable Mode Command Set
44