Copy Interface Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
copy <filename> interface <interface> <slot/port>
Use the copy interface command to copy a file to a specified interface.
Syntax Description
<filename>
<interface>
<slot/port>
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 8.1
Usage Examples
The following example upgrades the ADSL interface with the firmware file configfile:
>enable
#copy configfile interface adsl 0/1
61200990L1-35E
Specifies file name of source file to copy.
Specifies interface to be upgraded.
Specifies slot and port number of interface.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
86