Debug Demand-Routing Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
debug demand-routing
Use the debug demand-routing command to activate debug messages associated with demand routing
errors and events. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example activates demand routing error and event messages:
>enable
#debug demand-routing
61200990L1-35E Copyright © 2005 ADTRAN 96