Clear User Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear user [console <user number> | ssh <user number> |
telnet <user number>]
Use the clear user command to detach a user from a given line.
Syntax Description
console <user number> Detaches a specific console user. Valid range is 0 to 1.
ssh <user number>
telnet <user number>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example detaches the console 1 user:
>enable
#clear user console 1
61200990L1-35E
Detaches a specific secure shell (SSH) user. Valid range is 0 to 4.
Detaches a specific Telnet user. Valid range is 0 to 5.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
75