Clear Sip Location Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear sip location [** | <username>]
Use the clear sip location command to clear session initiation protocol (SIP) location database statistics.
Syntax Description
**
<username>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example deletes all dynamic location entries:
>enable
#clear sip location **
61200990L1-35E
Clears all dynamic location entries.
Specifies specific username to clear.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
70