Clear Route-Map Counters Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear route-map counters <map>
Use the clear route-map counters command to reset route map hit counters.
Syntax Description
<map>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 11.1
Usage Examples
The following example clears all route map counters:
>enable
#clear route-map counters
61200990L1-35E
Specifies specific route map to be cleared.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
69