Clear Arp-Entry Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear arp-entry <address>
Use the clear arp-entry command to remove a single entry from the Address Resolution Protocol (ARP)
cache.
Syntax Description
<address>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example removes the entry for 10.200.4.56 from the ARP cache:
>enable
#clear arp-entry 10.200.4.56
61200990L1-35E
Specifies the IP address of the entry to remove.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
40