Clear Counters Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear counters [<interface> <interface id>]
Use the clear counters command to clear all interface counters (or the counters for a specified interface).
Syntax Description
<interface> Optional. Specifies a single interface. Enter clear counters ? or show interface ?
for a complete list of interfaces.
<interface id> Optional. Specifies the ID of the specific interface to clear (e.g., 1 for port channel 1).
Default Values
No default values necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Release 9.1
Usage Examples
The following example clears all counters associated with the Ethernet 0/1 interface:
>enable
#clear counters ethernet 0/1
61200990L1-35E
Command was introduced.
Command was expanded to include HDLC and tunnel interfaces.
Copyright © 2005 ADTRAN
Enable Mode Command Set
43