Clear Spanning-Tree Counters Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear spanning-tree counters [interface <interface id>]
The clear spanning-tree counters command clears the following counts: BPDU transmit, BPDU receive,
and number of transitions to forwarding state.
Syntax Description
interface <interface id>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 6.1
Usage Examples
The following example clears the spanning tree counters for Ethernet 0/10:
>enable
#clear spanning-tree counters interface eth 0/10
61200990L1-35E
Optional. Specifies a single interface. Enter clear spanning-tree counters ? for a
complete list of interfaces.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
72