Clear Lldp Counters Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
clear lldp counters
Use the clear lldp counters command to reset all local loop demarkation point (LLDP) packet counters to
zero on all interfaces.
Syntax Description
No subcommands.
Default Values
There are no default settings for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example resets all LLDP counters:
>enable
#clear lldp counters
61200990L1-35E Copyright © 2005 ADTRAN 62