Command Reference Guide
Enable Mode Command Set
clear tacacs+ statistics
Use the clear tacacs+ statistics command to delete all terminal access controller access control system
(TACACS+) protocol statistics.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example clears all TACACS+ protocol statistics:
>enable
#clear tacacs+ statistics
61200990L1-35E
Copyright © 2005 ADTRAN
74