Avaya S8700 Maintenance Manual page 2012

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Maintenance-Object Repair Procedures
The Inter-PN Index contains six fields (XX.XX.XX.XX.XX.XX), and the Inter-SN
Index has two (XX.XX). The Inter-PN Index reports faults in connectivity between
port networks and supersedes the Inter-SN Index, which reports faults in
connectivity between switch nodes. (The Inter-SN Index is only meaningful for
systems with a center stage switch having two switch nodes, each of which is
duplicated).
The meaning of each fault class field is given in the following table. A zero entry
indicates that there are no such faults reported. Higher numbers indicate
increasing number of faults. All zeros indicates perfect state of health. Unless the
PNCs are locked, the active PNC's state of health should always be equal to or
better than the standby's. (Otherwise, the system would perform a spontaneous
interchange.)
After a PNC-related alarm is cleared, the system performs a partial refresh of the
standby PNC. The corresponding fault class field is not updated to reflect the
improved state of health until the refresh is done. The state of health indexes will
not agree with the current alarm status during this period.
Inter SN Index: FC_SNIL s11.s10 FC_SNIHW
Table 8-521. PNC State-of-Health Fault Classes
Fault Class
FC_EAL
FC_INL
1
FC_BFD
FC_HW
FC_PER
FC_DS1
FC_SNIL
FC_SNIHW
1.
BFDLs only exist in Port networks that have an IPSI. Port networks that do not have an IPSI will
have the EI as Archangel and no BFDL faults.
8-1290
Issue 1 May 2002
Priority
Description
1
Number of PNs with EALs down
2
Number of PNs with LINL, RINL, or
EI-SNI neighbor link faults
3
Number of PNs with BFDL (Bearer
Fault Detection Link faults
4
Number of PNs affected by hardware
faults in a link having an EI as an
endpoint (Endpoints can be
determined with list fiber-link.)
5
Number of PNs affected by SNI peer
link faults for SNIs connected to EIs
6
Number of PNs affected by DS1C
facility faults
7
Number of inter-switch-node fibers
affected by peer or neighbor link
faults
8
Number of interswitch-node fibers
affected by hardware faults
MOs
EXP-PN
EXP-PN, SN-CONF
SYS-LINK
EXP-INTF,
SN-CONF,
FIBER-LK, SNI-BD,
DS1C-BD
SNI-PEER
DS1FAC
SNI-PEER
SN-CONF, SNI-BD,
FIBER-LK
555-233-143

Advertisement

Table of Contents
loading

Table of Contents