Renault Laguna III Manual page 2351

MECHANICAL COMPONENT CONTROLS
Vacuum pump: Removal - Refitting
F4R
Tightening torquesm
vacuum pump bolts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the front left-hand wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) ,
- the front left-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416,
55A, Exterior protection),
- the front bumper (see Front bumper: Removal -
Refitting) (MR 416, 55A, Exterior protection).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the non-return valve pipe (1) on the vacuum pump,
- the vacuum pump connector (2) ,
- the vacuum pump bolts (3) ,
- the vacuum pump.
REFITTING
I - REFITTING OPERATION FOR PART
8 N.m CONCERNED
a Refit:
- the vacuum pump,
- the vacuum pump bolts,
- the vacuum pump connector,
- the non-return valve pipe on the vacuum pump.
a Torque tighten the vacuum pump bolts (8 N.m).
II - FINAL OPERATION.
a Refit:
- the front bumper (see Front bumper: Removal -
Refitting) (MR 416, 55A, Exterior protection),
- the front left-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416,
55A, Exterior protection),
- the front left-hand wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) .
116899
37A-17
37A